| Miktar | Fiyat |
| 0 - 1 Adet | $2 |
Satıcı: BAUMERK
Description SCHOUBIT 1K is a bitumen-rubber modified, water based, single-component, ready to use liquid membrane with elastomeric additives, used for insulating water and damp. By the evaporation of the water it contains, it adheres firmly to the applied surface and forms an elastic waterproof layer. Fields of Application In all horizontal and vertical applications, In building base, underground storehouses and basements insulation from the direction of water (positive direction), In wet areas insulation such as bathroom, kitchen, balcony. Features and Benefits Applied as cold. Does not require heating or thinning. Ready to use. Provides a seamless insulation layer. Suitable for interior applications because of non-toxic and non-flammable content. Water based. Environment friendly. Adheres perfectly to all kind of surfaces, even when the surface is moist. Covers the capillary cracks. Provides permanent elasticity. Technical Data Content Color Density Solid Content Carbon dioxide Permeability Water Vapor Permeability Capillary Water Permeability Adhesion Strength Application Temperature Drying Time Touch dry Full curing Mechanical Strength HS Code Elastomeric Polymer Content Bitumen Emulsion Liquid form is petrol color, dry form is black 1,03 g/cm3 56% 418,24 m 14,293 m 0,025 kg/m2.h0,5 0,6 N/mm2 +5°C to +35°C 1 hour 4-5 hours 8 days 2715.00.00.00.00 Application Procedure Preparation of Substrate Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Sharp tips and horizontal/vertical joints which are suitable cracking should be chamfered with PH 55 or REPAMERK 1. Big pores and cracks should be filled with REPAMERK 301 repair mortar. To ensure strong adherence, avoid dust, and improve durability, non-metallic surfaces must be undercoated with B PR 101, and metallic surfaces must be undercoated with B PR 102. Application Method SCHOUBIT 1K is ready to use material, it should be applied as cold. After mixed well, it is applied with trowel, bitumen brush or spray gun. It dries within 4-5 hours depending on the weather conditions. It should not be applied in rainy days or within the temperatures lower than +5 °C. Second layer must be applied after first layer completely dry. For the applications that required higher durability against water pressure or on cracked surface, it must be reinforced with fiber glass, polyester felt, reinforcing fabric etc. The screed material obtained by mixing SCHOUBIT 1K with sieved fine sand and cement is applied with a trowel to smooth out and level the surface or to provide a protective coat over insulation. Consumption 0,80 – 1,0 kg/m2 for each layer. Recommended at least 2 layers application. Packaging 17 kg metal pail 200 kg barrel Shelf Life 12 months in original, unopened package. Storage Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight. Cleanup Information Clean tools and equipment with water immediately after use. Dried material can only be removed mechanically.
Türkçe 
İngilizce 
Almanca 
Fransızca 
