Willkommen bei Madeintur, der Exportplattform der Türkei
Willkommen bei Madeintur, der Exportplattform der Türkei
| Menge | Preis |
| 0 - 1 Stück | $1 |
Verkauft von: BAUMERK
Description SCHOUBIT 2K is a two component, bitumen-rubber based and reinforced with fiber and elastomeric resins, elastic and quick dry liquid membrane. By evaporation of water it contains, it adheres firmly to the applied surface and forms an elastic waterproof layer. Fields of Application In all horizontal and vertical applications, building base, underground storehouses and basements insulation and for insulating water leakages in wet areas such as bathroom, kitchen, balcony, toilets. For the applications that required higher durability against water pressure or on cracked surface, it can be reinforced with fiber glass, polyester felt, reinforcing fabric etc. Features and Benefits Applied as cold. Does not require heating or thinning. Ready to use. Provides a seamless insulation layer. Suitable for interior applications because of non-toxic and non-flammable content. Water based. Environment friendly. Adheres perfectly to all kind of surfaces, even when the surface is moist. Covers the capillary cracks. Provides permanent elasticity. Technical Data Content Color Density of Mixture Solid Content of Mixture Carbon dioxide Permeability Water Vapor Permeability Capillary Water Permeability Adhesion Strength Application Temperature Drying Time Touch dry Full curing Mechanical strength HS Code Liquid part : Elastomeric polymer content bitumen emulsion Powder part : Fiber reinforcement cement mixture Liquid form is dark green, dry form is black 1,20 g/cm3 63% 299,68 m 14,293 m 0,014 kg/m2.h0,5 0,7 N/mm2 +5°C to +35°C 1 hour 5-6 hours 8 days 2715.00.00.00.00 Preparation of Substrate Preparation of Substrate Application surface must be dry, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Sharp tips and horizontal/vertical joints which are suitable cracking should be chamfered with PH 55 or REPAMERK 1. Big pores and cracks should be filled with REPAMERK 301 repair mortar. To ensure strong adherence, avoid dust, and improve durability, non-metallic surfaces must be undercoated with B PR 101, and metallic surfaces must be undercoated with B PR 102. Application Method SCHOUBIT 2K is cold applicable. Powder B component in the bag is poured into liquid A component under low speed mixer, they are mixed together until there remains no lump, getting homogenous mixture. After they are mixed, it is applied with a bitumen brush or trowel. Depending on the weather conditions, it dries approximately in 1 - 2 hours. It can be applied on damp surfaces, but not on wet surfaces. It should not be applied under the rain or when the temperature lower than +5°C. Next layer should be applied when the previous layer completely dry. Consumption 3,0 – 5,0 kg/m2 for two layers. Packaging 24 kg bitumen emulsion + 8 kg powder = 32 kg as a set Shelf Life 12 months in original, unopened package. Storage Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight. Cleanup Information Clean tools and equipment with water immediately after use. Dried material can only be removed with industrial type solvents or/and mechanically.
Türkisch 
Englisch 
Deutsch 
Französisch 
